Weil-McLain GV90+ User Manual download pdf (Page 7)

Part number 550-142-055/0411

GV90+ gas-fired water boiler — User’s Information Manual

MONTHLY

Maintenance

Check boiler interior piping

1. Remove boiler jacket top.

2. Visually inspect for leaks around internal piping, circulators, relief valve and other ﬁttings.

Immediately call a qualiﬁed service technician to repair any leaks.

Have leaks ﬁxed at once by a qualifed service technician. Continual fresh makeup

water will reduce boiler life. Minerals can build up in sections, reducing heat

transfer, overheating cast iron, and causing section failure.

Do not use petroleum-based cleaning or sealing compounds in boiler

system. Severe damage to boiler and system components can occur, resulting in

possible severe personal injury, death or substantial property damage.

User maintenance procedures (continued)

Check venting system

1. Visually inspect the ﬂue gas vent piping for any signs of blockage, leakage or deterioration

of the piping. Notify your qualiﬁed service technician at once if you ﬁnd any problem.

Failure to inspect the vent system as noted above and have them repaired by a

qualifed service technician can result in vent system failure, causing severe per-

sonal injury or death.

Check automatic air vents (if used — use automatic air

vents with diaghragm-type expansion tanks only)

1. See Figure 3.

2. Remove the cap from any automatic air vent in the system and check operation by depress-

ing valve “B” slightly with the tip of a screwdriver.

3. If the air vent valve appears to be working freely and not leaking, replace cap “A”, twisting

all the way on.

4. Loosen cap “A” one turn to allow vent to operate.

5. Have vent replaced if it does not operate correctly.

Figure 3 Automatic air vent

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Weil-McLain GV90+ User Manual Page 7